[{"type":"paragraph","children":[{"t":"text","v":"Model File Release: SteinWipe_Hole_Template_V3_and_Rear_Backing_Plate_V2_May.26.1.2026.3mf","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Developed On: Bambu Lab P1 Series\/X1C","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Shipped Date: May.26.2026","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"Overview","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"This release contains the two printed components every SteinWipe hardware installation needs: the V3 hole locating template and the V2 rear backing plate. The same three drilled holes serve every wiper mount version Leckiestein has shipped since the creation of the P1\/X1 SteinWipe, so this manual is the single source of truth for getting those holes into the printer\u0026#39;s rear panel cleanly and accurately.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The .3mf bundle ships both parts in a single Bambu Studio file with the backing plate\u0026#39;s nut-pause already inserted. Print, drill, then install your wiper of choice (A tape-on version of SteinWipe Pro Advanced will be available as well for those who do not want to drill and bolt the wiper mount onto their machines).","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"Which wiper does this work with","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The hole pattern has not changed since the original SteinWipe launch in 2024\/early 2025. That means the V3 template and V2 backing plate are compatible with all three current wiper systems:","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"","b":false,"i":false},{"t":"link","v":"SteinWipe V1 (Original)","url":"https:\/\/makerworld.com\/en\/models\/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series#profileId-1050795","target":"_blank"},{"t":"text","v":" - Basic nozzle cleaning. The first wiper mount design; still supported via the original SWMC presets in ","b":false,"i":false},{"t":"link","v":"P1\/X1 SteinWipe Dev Pack 2025","url":"https:\/\/leckiestein.com\/products\/x1-p1-steinwipe-project-2025-dev-pack-swmc","target":"_blank"},{"t":"text","v":"","b":false,"i":false}]},{"children":[{"t":"text","v":"","b":false,"i":false},{"t":"link","v":"SteinWipe V2 Pro (Standard Edition)","url":"https:\/\/leckiestein.com\/products\/steinwipe-pro-standard-edition-stl-files-print-profile?variant=47563967135895","target":"_blank"},{"t":"text","v":" - Nozzle: cleaning, priming, thermal management, and ooze control. The refined upright-print wiper mount with the first integrated ProTab solution. Supported only by SWMC Pro presets in ","b":false,"i":false},{"t":"link","v":"P1\/X1 SteinWipe Dev Pack Pro 2026","url":"https:\/\/leckiestein.com\/products\/p1-x1-steinwipe-dev-pack-pro-2026","target":"_blank"},{"t":"text","v":"","b":false,"i":false}]},{"children":[{"t":"text","v":"","b":false,"i":false},{"t":"link","v":"SteinWipe V3 Pro (Advanced Edition)","url":"https:\/\/leckiestein.com\/products\/steinwipe-pro-advanced-pre-release-stl-files-print-profile?variant=47459283042455","target":"_blank"},{"t":"text","v":" - Nozzle: cleaning, priming, thermal management, ooze control. Wiper\/tab: adjustable height, and tool-less quick removal. The magnetic sliding-bracket system with adjustable wiper\/tab height. Supported only by SWMC Pro presets in ","b":false,"i":false},{"t":"link","v":"P1\/X1 SteinWipe Dev Pack Pro 2026","url":"https:\/\/leckiestein.com\/products\/p1-x1-steinwipe-dev-pack-pro-2026","target":"_blank"},{"t":"text","v":"","b":false,"i":false}]}]},{"type":"paragraph","children":[{"t":"text","v":"Pick whichever wiper suits your build. Drilling is identical for all three.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"For wiper installation steps, photos relevant to your specific wiper, and the SteinWipe Motion Control preset that drives it, head to the matching listing for your wiper version.","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"What\u0026#39;s in the download","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"V2 rear backing plate .3mf for Bambu Studio (Plate#1 with M3 nut pause already inserted)","b":false,"i":false}]},{"children":[{"t":"text","v":"V3 hole template .3mf for Bambu Studio (Plate#2)","b":false,"i":false}]},{"children":[{"t":"text","v":"Single file with 2 plates tuned for Bambu Lab PETG-HF; change filament settings if printing in something else","b":false,"i":false}]}]},{"type":"paragraph","children":[{"t":"text","v":"Terms of Use: ","b":false,"i":false},{"t":"link","v":"https:\/\/leckiestein.com\/policies\/terms-of-service","url":"https:\/\/leckiestein.com\/policies\/terms-of-service","target":""},{"t":"text","v":"","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"1. What you\u0026#39;ll need","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"1.1 Hardware","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"% Hardware lineup","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"steinwipe_install_hardware_lineup | scale=100 | caption=bottom","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"All hardware needed for any of the three wiper installations.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"\/%","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"Two M3 x 6mm button head cap screws","b":false,"i":false}]},{"children":[{"t":"text","v":"One M3 x 5mm button head cap screw","b":false,"i":false}]},{"children":[{"t":"text","v":"Three M3 nuts (these embed into the backing plate at the print pause)","b":false,"i":false}]},{"children":[{"t":"text","v":"One printed V2 rear backing plate","b":false,"i":false}]},{"children":[{"t":"text","v":"One printed V3 hole template","b":false,"i":false}]},{"children":[{"t":"text","v":"At least one SteinWipe wiper mount of your choice (V1, V2 Pro Standard, or V3 Pro Advanced)","b":false,"i":false}]},{"children":[{"t":"text","v":"One Bambu Lab A1 Series rubber wiper pad (sourced from leckiestein.com or Bambu Store)","b":false,"i":false}]}]},{"type":"heading","level":3,"children":[{"t":"text","v":"1.2 Tools","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"A drill, impact driver, or electric screwdriver","b":false,"i":false}]},{"children":[{"t":"text","v":"1\/16 inch drill bit (shorter the better)","b":false,"i":false}]},{"children":[{"t":"text","v":"1\/8 inch drill bit (shorter the better)","b":false,"i":false}]},{"children":[{"t":"text","v":"1\/4 inch drill bit (optional, used by hand for deburring)","b":false,"i":false}]},{"children":[{"t":"text","v":"2.0mm allen key for the M3 button head screws","b":false,"i":false}]}]},{"type":"paragraph","children":[{"t":"text","v":"The ideal tool is a slower-speed electric screwdriver paired with hex-shank drill bits.","b":true,"i":false},{"t":"text","v":" Hex-shank bits drop directly into a 1\/4 inch hex driver or impact, no chuck needed, and the lower speed of a screwdriver-style driver helps keep the template from melting under friction during the predrill pass.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"% Ideal drill setup","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"ideal_drill_with_hex_bits | scale=100 | caption=bottom","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"A slower-speed electric screwdriver with 1\/4 inch hex-shank drill bits. The total assembly length from the tip of the bit to the back of the driver should be no more than 250mm to drill square through the rear panel.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"\/%","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"1.3 Pre-assembled hardware kit (optional)","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"If you\u0026#39;d rather skip sourcing the hardware piece by piece, the ","b":false,"i":false},{"t":"link","v":"SteinWipe Hardware Install Kit","url":"https:\/\/leckiestein.com\/products\/steinwipe-install-kit?variant=47846567280791","target":"_blank"},{"t":"text","v":" is available in the store. It ships with:","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"The V3 hole template (printed)","b":false,"i":false}]},{"children":[{"t":"text","v":"Two M3 x 6mm button head cap screws","b":false,"i":false}]},{"children":[{"t":"text","v":"One M3 x 5mm button head cap screw","b":false,"i":false}]},{"children":[{"t":"text","v":"The V2 rear backing plate, printed with three M3 nuts already installed","b":false,"i":false}]}]},{"type":"paragraph","children":[{"t":"text","v":"You still supply your own drill bits, allen key, and the wiper mount itself.","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"2. Print the files","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"2.1 Print the V3 hole template","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Open the provided .3mf in Bambu Studio and slice. The file is developed for Bambu Lab PETG-HF; if you\u0026#39;re printing in another filament, change the filament settings to match.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The template is a single small print. Once it\u0026#39;s off the bed, set it aside.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"2.2 Print the V2 rear backing plate","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"In Bambu Studio, open the .3mf print file (opens as P1S but can be used for X1C as well), select the bedplate with the V2 backing plate and slice. The pause for inserting the M3 nuts is already in the file. When the printer pauses, place the three M3 nuts into the pockets one by one, confirm they\u0026#39;re seated flat, then resume the print.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Important change from previous backing plates:","b":true,"i":false},{"t":"text","v":" the V2 backing plate\u0026#39;s nut pockets are blind. There are no through holes. This is what allows the print to come off the bed cleaner and stronger than the original, since many users found trying to bridge over the nuts while maintaining a through hole was never reliably printable. The trade-off is that screw length now matters: an M3 x 6mm screw is the longest the wiper mount holes can accept, and the backing plate\u0026#39;s center screw must be M3 x 5mm or it will bottom out against the embedded nut.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"% Backing plate at the pause","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"backing_plate_nut_insert_pause | scale=100 | caption=bottom","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The printer paused with the three M3 nut pockets exposed. Drop a nut into each pocket, confirm it sits flat, resume. It may be helpful to use a longer M3 screw to thread the nuts onto when pressing them into place and then unthread once the nut in seated.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"\/%","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"3. Drill the rear panel","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.1 Prepare the printer","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Lower the print bed near the bottom of its travel and power off the printer at the rear switch. With the power off, you can now manually position the print head to the back right corner of the build area so it\u0026#39;s out of your way during drilling.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.2 Optional - tape behind the panel","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"A piece of masking tape applied to the inside face of the rear panel, behind the area you\u0026#39;ll be drilling, catches any plastic shavings that fall behind the panel as you drill through. Highly recommended if you\u0026#39;re worried about debris inside the back panel and you\u0026#39;d rather not vacuum the inside of your printer afterwards.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"% Tape placement behind rear panel","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"masking_tape_behind_panel | scale=100 | caption=bottom","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Masking tape covering the inside of the rear panel directly behind the wiper mount drill zone.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"\/%","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.3 Pre-drill the template","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Before drilling the printer\u0026#39;s rear panel, run the 1\/16 inch bit through the three holes in the printed template. The goal is to clean any layer seam lip out of the template so the bit passes cleanly. Run the bit at low speed to avoid melting the template walls from friction.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"This step matters more than it sounds; chips from the rear panel need a clear path out through the template holes during the next step. A predrilled template evacuates chips instead of jamming them between the printer panel and the template.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.4 Drill the 1\/16 inch pilot holes","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Hold the template firmly against the rear panel in its install position. The best grip is to clamp the rear panel through the bed mechanism opening with one hand, pinching the template between your thumb and fingers against the outside of the panel.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Drill the three 1\/16 inch pilot holes at low speed. Keep the drill assembly perpendicular to the rear panel. If masking tape used, avoid drilling far past the panel and into the masking tape used to catch the shavings on the back side of the panel- the tap may become twisted around the drill bit.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Drill assembly length matters.","b":true,"i":false},{"t":"text","v":" From the tip of the drill bit to the back of the driver, the total length should not exceed 250mm. Anything longer and you won\u0026#39;t have enough room between the drill body and the printer frame to keep the bit square to the panel. Hex-shank drill bits in a screwdriver-style driver are the easiest way to stay under the 250mm limit.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"% Pilot hole drilling","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"drilling_pilot_holes_through_template | scale=100 | caption=bottom","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The 1\/16 inch pilot pass through the template, drill held square to the rear panel. Run the drill at low speed.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"\/%","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.5 Open the pilot holes to 1\/8 inch","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Remove the template and swap to the 1\/8 inch drill bit. Same rules: keep the assembly under 250mm total length, drill at low speed, stay perpendicular to the panel and use very light pressure. The drill will want to grab the edges of the hole and pull itself through the hole aggressively if not careful. ","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Run the bit through each of the three pilot holes.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.6 Optional - deburr the holes by hand","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"After drilling the 1\/8 inch holes, you may want to make use of a 1\/4 inch drill bit to clean up any small burrs to provide a flat clean surface for the SteinWipe mount to seat. Do not chuck up the drill bit - spin it by hand two or three turns in each freshly drilled hole to avoid accidental 1\/4 inch holes in the rear panel! The goal is to deburr the edges, not to remove material. Skip this step if your fear you may go to far an enlarge the holes.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"3.7 Optional - remove the masking tape","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"If you applied masking tape behind the panel in step 3.2, press the tape into the shavings before peeling it off. Anything that fell during drilling should come off stuck to the tape.","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"4. Install the backing plate","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The backing plate goes behind the rear panel. Its job is to give the wiper screws something to thread into without needing to hold nuts behind the panel by hand which would be prone to spinning when tightening the wiper bracket mounting screws.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"4.1 Position the backing plate","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Reach behind the rear panel and position the backing plate so its three nut pockets align with the three holes you just drilled. The center hole gets the short screw; the two outer holes will eventually take the longer wiper mount screws. You my find it easier to roll some tape around your finger to stick the backing plate to your hand if you feel you may drop the plate inside the rear panel.","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"4.2 Thread the M3 x 5mm screw into the center hole","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Through the front panel, thread the M3 x 5mm button head screw into the center hole and into the backing plate. Snug it down with the 2.0mm allen key. This screw is what holds the backing plate into place during wiper removal and installation. This one screw never needs to be removed after installation.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Do not over-tighten.","b":true,"i":false},{"t":"text","v":" The backing plate is printed plastic; over-tightening warps it over time, which makes the two outer holes drift out of alignment and turns the wiper mount install into a fight every time you remove it for cleaning\/service. Snug is enough.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"% Backing plate installed","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"backing_plate_installed_rear | scale=100 | caption=bottom","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Backing plate held in place by the single center M3 x 5mm screw, ready to receive the wiper mount.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"\/%","b":false,"i":false}]},{"type":"heading","level":3,"children":[{"t":"text","v":"4.3 Test-thread the outer screws","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Before installing any wiper, take the final two M3 x 6mm screws and thread them into the two outer holes by hand. Just a turn or two each, enough to confirm the backing plate\u0026#39;s outer nut pockets are aligned with the drilled holes.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"If the screws don\u0026#39;t thread cleanly because the backing plate has shifted; loosen the center screw, reposition the backing plate and retighten.","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"Once both outer screws thread freely, back them out and set them aside. You\u0026#39;re ready to install whichever SteinWipe wiper version you\u0026#39;ve chosen.","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"5. Next steps - install your wiper","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"The drilled holes and installed backing plate are universal across the three wiper versions. For wiper-specific install steps, photos showing your specific hardware in place, and the Motion Control preset that drives the wiper behavior, follow the listing matching your wiper:","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"","b":false,"i":false},{"t":"link","v":"SteinWipe V1 (Original)","url":"https:\/\/makerworld.com\/en\/models\/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series#profileId-1050795","target":"_blank"},{"t":"text","v":" ","b":false,"i":false}]},{"children":[{"t":"text","v":"","b":false,"i":false},{"t":"link","v":"SteinWipe V2 Pro (Standard Edition)","url":"https:\/\/leckiestein.com\/products\/steinwipe-pro-standard-edition-stl-files-print-profile?variant=47563967135895","target":"_blank"},{"t":"text","v":" ","b":false,"i":false}]},{"children":[{"t":"text","v":"","b":false,"i":false},{"t":"link","v":"SteinWipe V3 Pro (Advanced Edition)","url":"https:\/\/leckiestein.com\/products\/steinwipe-pro-advanced-pre-release-stl-files-print-profile?variant=47459283042455","target":""},{"t":"text","v":" ","b":false,"i":false}]}]},{"type":"paragraph","children":[{"t":"text","v":"Each listing carries the wiper STL files within the appropriate print profile (download for free when logged in), and version-specific install photos.","b":false,"i":false}]},{"type":"heading","level":2,"children":[{"t":"text","v":"6. Notes","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"The hole pattern is identical across V1, V2 Pro Standard, and V3 Pro Advanced wipers. One drill job covers any wiper you choose, now or later. One backing plate is used per printer.","b":false,"i":false}]},{"children":[{"t":"text","v":"If you drill the 1\/8 inch holes oversized, the wiper mount will shift slightly each time you remove and reinstall it, which means recalibrating XY wiper offsets after every cleaning. Installing SteinWipe Pro Advanced can mask this issue since the magnetic baseplate stays bolted when the wiper is removed. Ideally, correctly sized holes let the wiper mounts return to the same position and keep your calibration valid.","b":false,"i":false}]},{"children":[{"t":"text","v":"The 250mm drill assembly length limit isn\u0026#39;t a suggestion. Longer drill setups can\u0026#39;t be held square to the rear panel inside the printer, and an off-square hole will result in mounting holes outside the correct positions that no amount of Gcode calibration fixes.","b":false,"i":false}]},{"children":[{"t":"text","v":"Hex-shank drill bits in a 1\/4 inch hex driver socket are the cleanest way to stay under the length limit and keep speeds low.","b":false,"i":false}]}]},{"type":"heading","level":2,"children":[{"t":"text","v":"7. Known issues","b":false,"i":false}]},{"type":"list","listType":"unordered","items":[{"children":[{"t":"text","v":"None reported at release. Issues should be posted in the Leckiestein Discord #steinwipe channel.","b":false,"i":false}]}]},{"type":"heading","level":2,"children":[{"t":"text","v":"8. Terms and Conditions","b":false,"i":false}]},{"type":"paragraph","children":[{"t":"text","v":"By downloading and using these files, you agree to the ","b":false,"i":false},{"t":"link","v":"Leckiestein Terms of Service","url":"https:\/\/leckiestein.com\/policies\/terms-of-service","target":""},{"t":"text","v":".","b":false,"i":false}]}]

[{"base":"steinwipe_install_hardware_lineup","url":"https:\/\/leckiestein.com\/cdn\/shop\/files\/steinwipe_install_hardware_lineup.jpg?v=1779835857\u0026width=2400","width":4032,"height":2268},{"base":"ideal_drill_with_hex_bits","url":"https:\/\/leckiestein.com\/cdn\/shop\/files\/ideal_drill_with_hex_bits.jpg?v=1779836310\u0026width=2400","width":4032,"height":2268},{"base":"backing_plate_nut_insert_pause","url":"https:\/\/leckiestein.com\/cdn\/shop\/files\/backing_plate_nut_insert_pause.jpg?v=1779845020\u0026width=2400","width":4032,"height":2268},{"base":"masking_tape_behind_panel","url":"https:\/\/leckiestein.com\/cdn\/shop\/files\/masking_tape_behind_panel.jpg?v=1779893671\u0026width=2400","width":4032,"height":2268},{"base":"drilling_pilot_holes_through_template","url":"https:\/\/leckiestein.com\/cdn\/shop\/files\/drilling_pilot_holes_through_template.jpg?v=1779893959\u0026width=2400","width":5712,"height":3213},{"base":"backing_plate_installed_rear","url":"https:\/\/leckiestein.com\/cdn\/shop\/files\/backing_plate_installed_rear.jpg?v=1779894359\u0026width=2400","width":3905,"height":2197}]